Panasonic WJ-SX650 manual Sequence Setting, Setting item Parameter Remarks

●Sequence Setting

Sequence setting is performed in "Sequence" of WJ-SX650 Series Administrator Console. The following settings are available for each sequence step.

Setting item	Parameter	Remarks
LCN (Logical Camera Number)	1 to 999	Camera position numbers are also avail-
		able for parameters. (CAM-P)
Preset	1 to 256
AUX1/2	ON, OFF, - -	–
Dwell	0 to 30 sec	Dwell time to display each camera
		image
		If Dwell is set to 0 sec, sequence steps
		will be skipped.
		(Group preset has no sequence steps,
		and Dwell setting is not available.)

Note: Preset and AUX1/2 will not be activated for cameras selected by operators with higher priority or restricted by the cam- era access setting

63