RECORDER CONTROL

The following is the procedure examples for recorder control. Refer to p. 36 Lists of Functions and Operations for other recorder control procedures not described here.

The following procedures are available when a recorder is selected.

Playback

In the following example, you will play back the recorded image of Camera 3.

1. Check that Camera 3 has been selected.

WV-CU950/650WV-CU360C/360CJ

Multiscreen Display

WV-CU950/650

Press the MULTI SCREEN button.

The recorder will be selected, and images will be displayed in multiscreen segments on the selected monitor.

WV-CU360C/CJ

Press the MULTI SCREEN SEL button while holding down the SHIFT button.

The recorder will be selected, and images will be displayed in multiscreen segments on the selected monitor.

2.Press the PLAY/PAUSE*1 (or PLAY*2) button. The recorder connected to Camera 3 will be activated, and recorded image of Camera 3 will be played back.

*1 WV-CU950/650 *2 WV-CU360C/CJ

WV-CU950/650WV-CU360C/360CJ

Manual Recording

WV-CU950/650

Press the REC button.

The recorder will be activated, and recording will be start- ed.

WV-CU360C/CJ

1.Select a recorder. (Refer to p. 25 Recorder Selection.)

2.Press the REC button.

The recorder will be selected, and recording will be started.

Note

Recording follows the manual recording setting of recorder.

Note

You cannot specify multiscreen segment patterns.

Search Playback

Press the SEARCH*1 (or INDEX*2) button.

The recorder will be selected, and a search list (time-and- date entry form, recording event search list, VMD search list, or marking search list) will be displayed on the selected monitor.

*1 WV-CU950/650

*2 WV-CU360C/CJ

Notes:

Depending on selected recorder disks, the search list display may differ.

In a search list, you can select a recorded image to play back. Refer to the operating instructions of recorder for operating procedures.

Playing the Latest Recorded Image

WV-CU950/650

Press the GO TO LAST button.

The recorder will be selected, and the latest recorded image of selected camera will be played back.

Notes:

Depending on statuses, recorder control may not be performed properly. In this case, check the recorder status, and retry the control.

When you use WJ-HD300 Series, start playback before pressing the GO TO LAST button.

60

Page 60
Image 60
Panasonic WJ-SX650 manual Recorder Control