Paradyne 3160-A2-GB21-50 manual Far End Group, DS1/E1 MIB, DS1 Fractional Group, DS1/E1 MIB

SNMP MIB Objects

Near End Group ± The DS1 Current Table Objects (dsx1CurrentEntry)

The following DS1 current table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1CurrentIndex ± The index that identifies the T1 interface.

•dsx1CurrentESs ± Errored Seconds for the current interval.

•dsx1Current SESs ± Severely Errored Seconds for the current interval.

•dsx1CurrentUASs ± Unavailable Seconds for the current interval.

•dsx1CurrentCSSs ± Controlled Slip Seconds for the current interval.

•dsx1CurrentBESs ± Bursty Errored Seconds for the current interval.

Near End Group ± The DS1 Total Table Objects (dsx1TotalEntry)

The following DS1 total table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1TotalIndex ± The index that identifies the T1 interface.

•dsx1TotalESs ± The 24-hour total Errored Seconds.

•dsx1Total SESs ± The 24-hour total Severely Errored Seconds.

•dsx1TotalUASs ± The 24-hour total Unavailable Seconds.

•dsx1TotalCSSs ± The 24-hour total Controlled Slip Seconds.

•dsx1TotalBESs ± The 24-hour total Bursty Errored Seconds.

Near End Group ± The DS1 Interval Table Objects (dsx1IntervalEntry)

The following DS1 interval table objects are provided for the network interface only. Objects in the table that are not listed are not supported and will return an error status if access is attempted.

•dsx1IntervalIndex ± The index that identifies the T1 interface.

•dsx1IntervalNumber ± The interval number (1 to 96).

•dsx1IntervalESs ± Errored Seconds for the interval.

•dsx1Interval SESs ± Severely Errored Seconds for the interval.

•dsx1IntervalUASs ± Unavailable Seconds for the interval.

•dsx1IntervalCSSs ± Controlled Slip Seconds for the interval.

•dsx1Interval BESs ± Bursty Errored Seconds for the interval.

Far End Group, DS1/E1 MIB

The DS1 Far End Group consists of the following three tables:

•DS1 Far End Current

•DS1 Far End Interval

•DS1 Far End Total

These tables are not supported for either the network or DTE Drop/Insert (DSX-1) interface.

DS1 Fractional Group, DS1/E1 MIB

The DS1 Fractional Group consists of the DS1 fractional table. This table (dsx1FracTable) is fully supported by the DSU/CSU and allows channel (time slots) to be mapped between the T1 interfaces and data ports. If an invalid channel map (e.g., two interfaces mapped to a single time slot, one interface mapped to two T1s, etc.) is received, an error will be returned to the SNMP manager. The DSU/CSU will validate all channel configurations before applying them.

3160-A2-GB21-50 January 1997 E-11