Paradyne 3160-A2-GB21-50 manual CommunityName1 Next Edit Clear, Public Up Down Save

ACCULINK 316x DSU/CSU

8. Press F2 (Edit) to edit the community name.

CommunityName1:

Next Edit Clear

F1 F2 F3

NOTE

Steps 9 and 10 describe the process for entering text strings for Mgmt configuration options. This process applies to entering any text strings into Mgmt configuration options.

9.Use the and keys to position the cursor under the character you want to change. Press

F1 (Up) or F2 (Down) to scroll through the valid numbers/characters for the text string.

public

Up Down Save

F1 F2 F3

The F1 (Up) key scrolls through the ASCII character set in the following order: numbers (0 ±9), lowercase letters (a±z), uppercase letters (A±Z), space character, ASCII symbols (ascending order, based on ASCII code), and the End of Line symbol (← ). The ← erases all characters to the right of the cursor.

10.When you are through changing the community name, you must press F3 (Save) to save the value. Otherwise, the original value will be retained.

11.Press F1 (Next) until the Access 1 configuration option appears.

12.Press F2 (Read) or F3 (R/W).

Access 1:

Next Read R/W

F1 F2 F3

The Read selection allows read-only access (SNMP ªGetº) to the accessible objects in the MIB when community name 1 is used. The R/W selection allows Read/Write access (SNMP ªGetº and ªSetº) to the objects in the MIB. Write access is allowed for all objects specified as read/write in the MIB. Read access is allowed for all objects specified as read-only or read/write.

3-18 January 1997 3160-A2-GB21-50