Paradyne 3160-A2-GB21-50 Setting Customer Identification

Async Terminal Operation
H-53160-A2-GB21-50 January 1997
NOTE
The following procedures are
examples only. This appendix
uses examples to help you
become familiar with the use of
the async terminal for DSU/CSU
control.
Setting Customer
Identification
The customer identification is used to uniquely identify
the DSU/CSU.
To change the customer identification (Customer ID),
1. From the Main Menu screen, select Control.
The Control screen appears.
2. From the Control screen, select Customer ID.
The Customer ID screen appears (Figure H-3).
3. Use the Customer ID field to set the customer
identification.
The customer identification may be up to
8 characters long.
Select Clear to remove all the characters in the
associated field.
4. Select Save to store the information in nonvolatile
memory.
In addition to the customer identification, you may also
enter a system name, system location, and system contact.
Although only 40 characters are displayed for these fields,
you may enter up to 255 characters. The fields scroll as
the additional characters are added.
main/control/customer id
Customer ID: Node A Model: 31xx
Slot: xx
CUSTOMER ID
Customer ID: Clear
System Name: Clear
System Location: Clear
System Contact: Clear
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save
Customer
Identification
Field
Figure H-3. Customer Identification Screen