Index
Index-53160-A2-GB21-50 January 1997
reset
front panel indications, 2-9
procedure, 3-43
Reset branch
example of use, 3-43
in the menu tree, A-1
Rlpbk (Remote Loopback) branch
example of use, 4-15–4-16
in the menu tree, A-1
router applications, 2-2
RS-449 interface, D-10
Sself-test
displaying results, 4-2
front panel indications, 2-9, 3-5
troubleshooting, 4-11
Send Ones configuration option, C-3, C-5
serial crossover cable, D-15
Serial Line Internet Protocol (SLIP)
procedure for configuring, 3-16
used with SNMP system, 1-2, 2-3, 3-14, F-1
SES (Severely Errored Seconds) report, 4-7
Shared Diagnostic Control Panel (SDCP)
acquiring/releasing the user interface, 3-35–3-36
physical description, 3-2
SNMP (Simple Network Management Protocol)
agent, 1-2
configuration options
examples of use, 3-14–3-18, 3-19–3-20
menu tree branches, A-1
option table, C-28–C-36
option worksheet, C-44
connection examples, 2-3–2-4, 2-8, F-1–F-6
database, 1-2
IP addressing, F-1–F-6
manager, 1-2
MIBs
functional description, E-1–E-2
list of objects, E-1–E-20
procedure for configuring access, 3-17–3-18
objects, 1-2
principles of operation, 1-2
SNMP Down message, 4-4, 4-12
traps
functional description, 1-2, 4-10
procedure for configuring, 3-19–3-20
specifications, environmental, B-1, B-2
Stat (Status) branch
examples of use, 3-8, 3-10, 4-2, 4-3, 4-5, 4-26
in the menu tree, A-1
status messages. See messages, status
STest (Self-Test Health) branch
example of use, 4-2
in the menu tree, A-1
StEvnt (Status Event) report, 4-8
straps. See configuration options
subnet, 3-14, C-30, C-31, C-33, F-2
synchronous data port. See PORT (1–4) interface
TT1line, D
network, connection, D
technical specifications, B-1
Test branch
example of use, 4-15–4-26
in the menu tree, A-1
test commands, 4-15–4-26
front panel LED indications, 3-5
lamp test, 4-25
local loopback, 4-17–4-21
abort, 4-21
data channel loopback (DCLB), 4-20
data terminal loopback (DTLB), 4-20–4-21
DTE loopback (DLB), 4-19
line loopback (LLB), 4-18
payload loopback (PLB), 4-18
repeater loopback (RLB), 4-19
remote loopback, 4-15–4-16
test messages, 4-26
test patterns, 4-22–4-24
test jacks
functional description, 4-13–4-14
physical description, 1-3, 3-2, 3-4
timing. See clocking
traps, SNMP. See SNMP, traps
troubleshooting
device health, 4-3–4-4
diagnostic table, 4-11–4-12
performance, 4-5–4-8
power-up self-test, 2-9, 4-2
TStat (Test Status) branch
example of use, 4-26
in the menu tree, A-1
UUAS (Unavailable Seconds) report, 4-7
User Configuration branch
example of use, 3-15, 3-41–3-45
in the menu tree, A-1
option table, C-17–C-24
option worksheet, C-38
user interface, acquiring/releasing, 3-35–3-36
VV.35 interface, D-12
V.54 Loop 2. See data channel loopback (DCLB)
V.54 Loop 3. See data terminal loopback (DTLB)
WwarmStart trap, 4-10
weight, B-2
worksheets, configuration option, C-37–C-44, H-13