135.18.2.17 | Paradyne 3160-A2-GB21-50 specs

IP Network Addressing Scenarios

Scenario 2

The second scenario (Figure F-2) is a carrier communicating with standalone remotes. This scenario is similar to the previous one, treating the carrier devices as the daisy-chained devices. All devices are still on the same subnet, and the subnet mask is FF.FF.FF.00. A static route still must be set in the NMS host to subnet 135.18.2.0.

135.18.2.17

135.18.2.18

NETWORK

ETHERNET

135.18.40.1

LAN ADAPTER SUBNET 135.18.40.0

COM IP ADDRESS: 135.18.40.3

FT1

SUBNET 135.18.2.0

T1

135.18.2.26

135.18.2.1

135.18.2.16

496-14646-02

Figure F-2. Local Carrier with Remote Standalone

3160-A2-GB21-50

January 1997

F-3

Image 188

Paradyne 3160-A2-GB21-50 manual 135.18.2.17

Contents

Area Code Change Acculink 316X Data Service Unit Channel Service Unit Warranty, Sales, and Service Information TrademarksOperators Guide 3160-A2-GB21-50 Copyright 1997 Paradyne Corporation. All rights reserved Important Safety Instructions 315x CSU Facility Interface Codes Description Government Requirements and Equipment ReturnUnited States Canada Important Instructions Acculink 316x DSU/CSU Table of Contents Glossary Index Preface Objectives and Reader AssumptionsRelated Documents Reference Documents Acculink 316x DSU/CSU Overview FeaturesIntroduction Telnet Access Alarm Message CapabilityDTE Drop/Insert DSX-1 Interface Front Panel Emulation Physical Description Standalone DSU/CSU Front Panel 3164 Standalone DSU/CSU Rear Panel DSU/CSU Rear Panel AUX Port Installation Application Examples Network Snmp or Telnet Connection Examples EDL is only available on 2-port and 4-port DSU/CSUs Connection through a LAN Adapter Important Instructions Optional Power SourcesInstalling the +24 Vdc Power Supply Installing the Single ±48 Vdc Power Supply 10. ±48 Vdc Single Source Power Supply Pinouts Installing the Redundant ±48 Vdc Power Supply 11. ±48 Vdc Redundant Source Power Supply Pinouts Cabling Examples 12. Cabling Examples Power-Up Self-Test Self-Test ProgressSelf-Test Passed Self-Test Acculink 316x DSU/CSU January Operation LCD Using the Front Panel Standalone DSU/CSU Front Panel Keypad LCD LEDs Test Jacks Network Interface LEDs System LEDsName Color Meaning DTE Drop/Insert DSX-1 Interface LEDs Name Color Meaning PDV Data Port LEDs DTR Displaying Unit Identity Status TStat LED IDIdentity Identity Cust ID=xxxxxxxx Setting Customer Identification Selecting the DTE Drop/Insert or Data Port for LED Display Displaying LED Conditions Status Perf TStat LEDSelect LEDs T1 Prt1 Prt2 LED Display Test NetSig Changing Configuration Options Displaying/Editing Configuration Options Load from Activ Cust1Choose Funct Edit Save Edit DTE Port NET Saving Edit Changes Selecting/Copying to a Specific PortSave Edit to Activ Cust1 Port Select Copy Prt1 Prt2 Configuring the DSU/CSU for Snmp or Telnet Access Selecting the PortCopy From Prt1 Prt2 Prt3 Copy To All Prt1 Prt2 Setting the IP Address Edit User Alarm MgmtMgmt Config Gen Trap Edit Chan Gen User Selecting the Link Layer Protocol Com IP Adr Next Edit Clear000.000.000.000 Up Down Save 010.155.111.222 Up Down Save Specifying the Community Names and Access Types Com Link Next PPP Slip Public Up Down Save Access Next Read R/WCommunityName1 Next Edit Clear Configuring Snmp Traps Enabling Snmp Trap MessagesSelecting the Number of Trap Managers Snmp Trap Next Enab Disab Trapn Dst Next None Com Configuring a Destination for Snmp TrapsNum Trap Mgrs1 Next Configuring DS0 Channels Example of Channel Allocation Network Interface Network Channel Allocation Example of Interface Worksheet DTE Chan Assign Voice Config N1 ± RBS or Data Example of RBS Information Worksheet Port Channel Configuration Worksheet Ports 1 Port Chan Options Value Conf 10. Port Channel Configuration Worksheet Ports 3 Displaying DS0 Channel Assignments Display Channel SymbolsSymbol Meaning Channel Config Prt1 Prt2 Prt3 Allocating Data PortsEditDTE Port Chan Block or Acami Assignment Method Assign ToNET Next NET DTEAssign By Next Block Acami Port Rate384 Next 64 Individual Channel Assignment Method Assign ByBlock Next Block AcamiAssign ByChan Block Acami Chan Next Prt1 Prt2 DTE Channels Assign Voice Providing Backup Capability Clearing DS0 Channel AllocationClear Channel Port1 11. Common Clocking Configurations Selecting the Timing Source Configuring for Network Timing Configuring for External Timing Establishing Access Security on a Port Setting a PasswordPasswordNone Next None Com Control Reset CID Passwd Entering a Password to Gain Access Acquiring/Releasing User InterfaceAcquiring the Active User Interface Passwd Up Down Done Releasing the Active User Interface FP Access Next Enab DisabEnabling/Disabling the Front Panel Using the Integral Modem in Standalone DSU/CSUs Call Setup Pass Dial ChDirEntering Numbers in the Phone Directories Xxxxxxxxxxxxxxxxx Next Prev Edit Xxxxxxxxxxxxxxxxx Up Down Save Initiating a Call for Front Panel Pass-Through Operation Up Down Dial Disconnect Command Complete Disconnecting the Modem ConnectionCall Setup Disc ChDir Enabling the Communication Port for Carrier-Mounted DSU/CSUs Com Port Next Enab Disab Control Sequences Ascii HEX Download Operations Deactivating the Alarm Relay for Carrier-Mounted DSU/CSUsResetting the DSU/CSU Acculink 316x DSU/CSU January Security Lvl1 Lvl2 User Interface Access Security for Standalone DSU/CSUsChanging User Interface Access Security Acculink 316x DSU/CSU January Maintenance Self-Test Health Status DevHS STest PerfSTest Health Passed Self-Test Health Messages Device Health and Status Device H/S OOF at DTEAuto Dev H/S OOF at DTE Health and Status Messages Health and Status Messages Performance Reports Performance Telco User Prt1User Registers Cur 24Tot Intvl User Current Event = xx,xxx User 24 Hour VldIntvl = User Intvl Up Down DsplyUser Intvl ES=xxx Control Rel VldIntvl CurTimerEvent StEvnt Complete Alarms Snmp Trap per Interface Trap Meaning Snmp TrapsEnterprise-Specific Trap Definitions Trap Value Event Troubleshooting Troubleshooting Symptom Possible Cause SolutionsYellow at Net Yellow at DTE AIS at DTE X x x x x Mon Jack Eqpt Test JacksControl Passwd Mon Test Jack Functions Test Jack Name Function Test Commands Remote Loopback TestsSending a Line Loopback Up or Down Test Rlpbk Lpbk Ptrns Sending a V.54/ANSI FT1 Activation/Deactivation Rem Loop Type Prt1 Prt2 Prt3 Local Loopback Tests Valid Loopback Combinations Loopback Abort LLB PLB Starting a Line LoopbackStarting a Payload Loopback Loopback Starting a DTE LoopbackStarting a Repeater Loopback Loopback Dclb Prt1 Prt2 Prt3 Starting a Data Channel LoopbackStarting a Data Terminal Loopback Loopback Abort All Aborting LoopbacksLoopback Dtlb Prt1 Prt2 Prt3 Test Patterns Sending Test Patterns Monitoring Test Patterns Patterns Mon QrssMonitor Name NET Prt1 Prt2 Qrss Network Qrss Port Aborting Test Patterns Patterns Abort All Send Mon Aborting a Lamp Test Lamp TestStarting a Lamp Test Test Status Messages Displaying DSU/CSU Test StatusStatus STest Perf TStat Front Panel Menu a DSU ESF 3160-A2-GB21-50 Technical Specifications B Models 3160/3164 Port Interface Configuration Options C DTE Interface Configuration Options DTE Interface Configuration Options Table C-1 DTE Interface Configuration OptionsDTE Port Enab Next Enab Disab Prev DTE Framing ESF Factory 1 D4 Factory Next D4 ESF Prev Extrn DLB Disab Next Enab Disab Prev Send Ones Enab Next Enab Disab Prev Port Configuration Options Port Configuration OptionsTable C-2 Port Type E530 Factory Next E530 V.35 RS449 Prev Table C-2 Port Configuration Options All Ones Both Next Disab DTR RTS Both PrevRcv Yellow Halt Next None Halt Prev Tx Clock Int Next Int Ext Prev EDL Disab Next Enab Disab Prev InvertTxC Disab Next Enab Disab PrevInvrtData Disab Next Enab Disab Prev Err Rate 10E-4 Next 10E-4 10E-5 10E-6 10E-7 10E-8 10E-9 Prev Near-end Disab Next Disab Maint Send Both Prev Far-end Disab Next Disab Maint Prev Mgmt Link Disab Next Enab Disab Prev Network Interface Configuration Options Table C-3 Network Interface Configuration Options NET LLB Enab Next Enab Disab Prev NET PLB Enab Next Enab Disab PrevBit Stuff Next 62411 Part68 Disab Prev Circuit Ident Next Edit Clear Prev Channel Configuration Options Table C-4 DTE Channel Configuration Options Table C-5 Data Port Channel Configuration Options Channel Config Dsply Clear DTE Prt1 Prt2 Prt3 Prt4Assign To NET Next NET DTE Prtn Prtn Prtn Prev Assign By Block Next Block Acami Chan Prev Port Rate Next 128 192 256 320 384 448 576 640 704 768 832 896 960 10881216 1280 1344 1472 1536 Prev Next 112 168 224 280 336 392 N10 N11 N12 N24 Next Prev D10 D11 D12 D24 General Configuration Options Table C-6 General Configuration OptionsGen Yellow Enab Next Enab Disab Prev Clock Src NET Next NET DTE Prt1 Int Ext Prev Tst Timeout Enab Next Enab Disab Prev Tst Duration Next Up Down Save Prev User Interface Configuration Options Table C-7 User Interface Configuration Options Password None Next None Com Modem Both Prev Com Port Disab Next Enab Disab PrevCom Use Ascii Next Mgmt Ascii Daisy Term Prev ComExtDev Disab Next Disab AT Other Prev ComEscapeSeq Next Edit Clear Prev ComConnPrefix Next Edit Clear PrevComConnected Next Edit Clear Prev ComEscDel None Next None 0.2s 0.4s 0.6s 0.8s 1.0s Prev ComDisconnect Next Edit Clear PrevCom Type Async Next Async Sync Prev Com Clk Int Next Int Ext Prev Com Rate Next 1.2 2.4 4.8 9.6 14.4 19.2 38.4 Prev Char Length Next 7 8 PrevCParity None Next None Even Odd Prev CStop Bits Next 1 1.5 2 Prev CmDiscTm Next Up Down Save Prev Modem Use Ascii Next Mgmt Ascii Term PrevModem Type Async Next Async Sync Prev Modem Rate Next 1.2 2.4 Prev MStop Bits Next 1 2 Prev LSpaceDsc Disab Next Enab Disab PrevMInActTm Disab Next Enab Disab Prev MDiscTm Next Up Down Save Prev Aux Rate Next 9.6 14.4 19.2 38.4 Prev TnSession Disab Next Enab Disab PrevTnPaswd Disab Next Enab Disab Prev TnInActTm Disab Next Enab Disab Prev Alarm Configuration Options Table C-8 Alarm Configuration OptionsAlrm Msg Disab Next Disab Modem Com Both Prev Snmp Trap Disab Next Enab Disab Prev Dial Delay Next 1 2 3 4 5 6 7 8 9 10 Prev DialOut Disab Next Enab Disab PrevCall Retry Disab Next Enab Disab Prev Next None 1 2 3 4 5 Prev AlrmRelay Disab Next Enab Disab Prev Management Configuration Options Table C-9 General Management Configuration Options NMS n Access Read Next Read R/W Prev System Name Next Edit Clear PrevSystem Location Next Edit Clear Prev System Contact Next Edit Clear Prev Access 1 Read Next Read R/W Prev Access 2 Read Next Read R/W PrevCommunityName2 Next Edit Clear Prev IP Adr Next Edit Clear Prev Com IP Adr Next Edit Clear Prev Com NetMask Next Edit Clear PrevCom Link PPP Next PPP Slip Prev Modem IP Adr Next Edit Clear Prev Mdm NetMask Next Edit Clear Prev Alt Mdm IP Adr Next Edit Clear PrevAlt Mdm NetMask Next Edit Clear Prev Modem Link PPP Next PPP Slip Prev IPBusMast Disab Next Enab Disab Prev Aux IP Adr Next Edit Clear PrevAux NetMask Next Edit Clear Prev Table C-9 General Management Configuration Options Table C-10 Management Trap Configuration Options Num Trap Mgrs Next 1 2 3 4 5 6 PrevTrapn IP Adr Next Edit Clear Prev Gen Trap Both Next Disab Warm Auth Both Prev Trap I/F All Next NET DTE T1s Ports All Prev Entp Trap Enab Next Enab Disab PrevLink Trap Both Next Disab Up Down Both Prev Configuration Worksheets Value Default in BoldDTE Options General Alarm User Options Prt1 Options Prt2 OptionsPrt3 Options Prt4 Options Network Interface Network Channel Allocation D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D24 Port Chan Options Port Chan Options General Mgmt Mgmt Trap T1 Network Interface Table D-1 T1 Network Interface Connector Signal Pin NumberPin Assignments D Figure D-1. T1 Line Interface Cable, RJ48C-to-RJ48C Table D-2 DTE Drop/Insert DSX-1 Connector Signal Pin Number DTE Drop/Insert Interface Table D-3 Integral Modem Port Connector Signal Pin Number Modem Port Interface Table D-4 AUX Port Connector Signal Direction Pin Number AUX Port Interface Table D-5 COM Port Connector Signal Direction Pin Number COM Port Interface Figure D-5. COM Port-to-PC Cable Direction Pin Mnemonic Number EIA 530A Port Interface ConnectorTable D-6 EIA 530A Port Interface Connector Signal Circuit EIA 530A-to-RS449 Cable Interface Figure D-7. EIA 530A-to-RS449 Cable Table D-7 RS449 Cable Interface Signal Circuit EIA 530A-to-V.35 Cable Interface Figure D-8. EIA 530A-to-V.35 Cable Table D-8 Cable Interface Signal Direction Pin Number EIA 530A-to-X.21 Cable Interface Figure D-9. EIA 530A-to-X.21 Cable Table D-9 Cable Interface Signal Serial Crossover Cable Pin Power Input Connector Optional DC Power CableTable D-10 DC Power Connector Signal Pin Number Table D-11 External Clock Connector Signal Pin Number Snmp MIB Objects E MIB II RFC System Group, MIB System Group ± ªsysServicesº Object system Interface Group, MIB Interface Group ± ªifDescrº Object ifEntry Interface Group ± ªifOperStatusº Object ifEntry IP Group ± ªipAdEntAddrº Object ipAddrEntry IP Group, MIB IP Group ± ªipRouteDestº Object ipRouteEntry DS1/E1 MIB RFC Near End Group ± ªdsx1ValidIntervalsº Object dsx1ConfigEntry Near End Group ± ªdsx1LineStatusº Object dsx1ConfigEntry Far End Group, DS1/E1 MIB DS1 Fractional Group, DS1/E1 MIB RS-232-like MIB RFC General Port Table, RS-232-like MIB General Port Table ± ªrs232PortTypeº Object rs232PortEntry Asynchronous Port Table, RS-232-like MIB Synchronous Port Table, RS-232-like MIB Output Signal Table, RS-232-like MIBInput Signal Table, RS-232-like MIB Generic-Interface MIB Extensions RFC Generic Interface Test Table, Generic Interface MIB Correlation between Menu Commands and Snmp Objects Enterprise MIB Dsx1TimeElapsed Dsx1CurrentESDsx1CurrentUAS Dsx1CurrentSES Set dsx1LoopbackConfig for Net T1 to dsx1LineLoop Set dsx1LoopbackConfig for Net T1 to dsx1NoLoopSet dsx1LoopbackConfig for Net T1 to dsx1PayloadLoop Set dsx1LoopbackConfig for DTE T1 to dsx1LineLoop Set/Display dsx1FracNumber and dsx1FracIfindex for DTE T1 Set/Display dsx1FracNumber and dsx1Fracifindex for DTE orDisplay rs232PortInSpeed or rs232PortOutSpeed for port n Set/Display rs232PortInSpeed or rs232PortOutSpeed for COM Acculink 316x DSU/CSU IP Network Addressing Scenarios F Scenario Figure F-1. Daisy-Chained Standalone at the Central Site 135.18.2.17 135 135 Figure F-5. Multiple COM Ports Connected to Different NMSs Installing Front Panel Emulation Software Front Panel Emulation G Starting Front Panel Emulation Before Using the Async Terminal Async Terminal Operation H Initiating an Async Terminal Session Ending an Async Terminal Session Main Status Test Configuration Control Menu Organization Table H-2 Keyboard Keys Usage Using Async Terminal ScreensTable H-1 Screen Function Keys Usage Figure H-3. Customer Identification Screen Figure H-4. Example of Display LEDs Screen Displaying or Editing Configuration Options Figure H-5. Configuration Load Screen Figure H-6. Configuration Edit/Display Screen Figure H-7. Configuration Save Screen Figure H-8. Enabling a Password Figure H-9. Setting a Password Figure H-10. Entering a Password Configuration Worksheets for the Async Terminal Interface Network Interface Options Front PanelEquivalent DTE Interface Options Front Panel Front Panel Sync Data Port Options Port Front PanelSync Data Port Options Port Async Terminal Operation Value Default in Bold General Options Front PanelUser Interface Front Panel Options Equivalent Internal Modem Options Equivalent External Device Options EquivalentTelnet Sessions Options Equivalent Port Use Aux Use None, Mgmt, Daisy Alarm & Trap Options Front PanelAuxiliary Port Options Equivalent General Snmp Management Options Equivalent Management and Communication Front PanelCommunication Protocol Options Equivalent Snmp NMS Security Options Equivalent Snmp Traps Options Equivalent Cable numbers for DSU/CSU are located Equipment Feature NumberEquipment List Acculink 316x DSU/CSU Glossary Acami allocation method AWG CRC6 DSR ISO LCP PDU RTS TXC Acculink 316x DSU/CSU Glossary-10 Index Index-2 Index Index-4 Index-5 Index-6