Configuration Options
C-113160-A2-GB21-50 January 1997
Channel Configuration
Options
The Channel configuration options are divided into two
tables as follows:
•DTE Channel Configuration Options (Table C-4)
•Data Port Channel Configuration Options
(Table C-5)
NOTE
Tables C-4 and C-5 describe the
DTE channel and data port
channel configuration options.
The configuration options in Table
C-4 (below) only appear if the
DTE Drop/Insert (DSX-1) port is
enabled and you are using a
2-port or 4-port DSU/CSU.
Table C-4
DTE Channel Configuration Options
DTE Channels:
Assign Voice
DTE Drop/Insert (DSX-1) Channel. Assigns DS0 channels from the DTE Drop/Insert (DSX-1) interface to DS0 channels
on the network interface, and specifies which DS0 channels carry voice signaling information.
Assign – Assigns DS0 channels from the DTE Drop/Insert (DSX-1) interface to the network interface.
Voice – Specifies which DS0 channels from the DTE Drop/Insert (DSX-1) interface are voice channels and should pass
Robbed Bit Signaling (RBS) information to the network interface.
N1 N2 N3 N4 N5 N6 N7 N8 N9 N10 N11 N12 N13 N14 N15 ... N24
– – – – – – – – – – – – – – – ... –
DTE Drop/Insert (DSX-1) Channel Allocation. Assigns DS0 channels from the DTE Drop/Insert (DSX-1) interface to the
network interface.
Line 1 displays the 24 channels for the network interface. Line 2 displays what is allocated to the DS0 channel indicated
in Line 1. Possible values for Line 2 are:
Value Meaning
– This DS0 channel is not allocated. You can modify this value on this screen.
Prt
n
This DS0 channel is allocated to port
n,
where
n
is a number from 1 to 4. You cannot modify this value
on this screen.
D
n
This DS0 channel is allocated to the DTE Drop/Insert (DSX-1) interface DS0 channel
n
, where
n
is a
number from 1 to 24. You can modify this value on this screen.
Assign DTE channels to network channels by pressing the Function key below the network channel desired. The DTE
channel number scrolls up one number each time you press the Function key. Only unassigned DTE channels appear
during scrolling.
D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 ... D24
RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS RBS ... RBS
Specify DTE Drop/Insert (DSX-1) Voice Channels. Specifies which DS0 channels from the DTE Drop/Insert (DSX-1)
interface are voice channels and should pass Robbed Bit Signaling information to the network interface.
Line 1 displays the 24 channels for the DTE Drop/Insert (DSX-1) interface. Line 2 displays whether the DS0 channel
indicated in Line 1 is a voice or data channel. Possible values for Line 2 are:
Value Meaning
RBS This DS0 channel is a voice channel carrying RBS information. When this DS0 channel is assigned to a
network DS0 channel, RBS information is preserved across the connection.
Data This DS0 channel is a data channel that does not contain RBS information. Signaling is not preserved
across the connection.
Press the Function key below the desired channel to toggle between RBS and Data.