Philips HR7633 manual Foodprocessor parts and accessories, Introduction

6ENGLISH

Foodprocessor: parts and accessories

A)Speed control

B)Motor unit

C)Built-in safety lock

D)Bowl

E)Tool holder

F)Peg of lid (activates and deactivates the safety switch)

G)Lid of bowl

H)Feed tube

I)Pusher

J)Cover with closeable insert storage space

K)Slicing insert medium

L)Shredding insert fine

M)Shredding insert medium

N)Insert holder

O)Blade (+ protective cover)

P)Kneading accessory

Q)Emulsifying disc

R)Spatula

Introduction

This appliance is equipped with an automatic thermal cut-out system.This system will automatically cut off the power supply to the appliance in case of overheating.

If your appliance suddenly stops running

1Pull the mains plug out of the wall socket.

2Press the 'PULSE / 0' button to switch the appliance off.

3Let the appliance cool down for 60 minutes.

4Put the mains plug in the wall socket.

5Switch on the appliance again.

Please contact your Philips dealer or authorised Philips service centre if the automatic thermal cut-out system is activated too often. CAUTION: In order to avoid a hazardous situation, this appliance must never be connected to a timer switch.

IMPORTANT

SAFEGUARDS

◗Read the instructions for use carefully and look at the illustrations before using the appliance.

◗Keep these instructions for use for future reference.

◗Check if the voltage indicated on the appliance corresponds to the local mains voltage (110 - 127V or 220 - 240V) before you connect the appliance.

◗Never use any accessories or parts from other manufacturers or that have not been specifically advised by Philips.Your guarantee will become invalid if such accessories or parts have been used.