Philips HR7633 manual Feed tube and pusher, Blade, Tips, Button is released

8 ENGLISH

			each other.The projection of the lid will
			now cover the opening of the handle.
		Feed tube and pusher
	C		Use the feed tube to add liquid ingredients
1
			and/or solid ingredients. Use the pusher to
			push ingredients down the feed tube.
C			You can also use the pusher to close the
		2
			feed tube in order to prevent ingredients

from escaping through the feed tube.

Blade

C 3 Put the blade on the tool holder.

C 4	Put the tool holder in the bowl.
5	Put the ingredients in the bowl. Pre-cut
	large pieces of food into pieces of approx.
	3 x 3 cm. Put the lid on the bowl.
C 6	The buttons allow you to adjust the speed
	of the appliance to obtain optimal results.

B'PULSE/0' button: for pulse operation and for turning the appliance off. If the 'PULSE / 0' button is pressed, the appliance runs at the highest speed.The appliance stops running when the

button is released.

1

CLICK

2

C

C

◗The blade can be used for chopping, mixing, blending, pureeing and preparing cake mixtures.

1Put the bowl on the motor unit.

2Remove the protective cover from the blade.

Bbutton 1: for normal speed. B button 2: for high speed.

See the table for the recommended speeds. Processing takes 10 - 60 seconds.

Tips

◗ The appliance chops very quickly. Use the

pulse function for short periods at a time, to

The cutting edges of the blade are very sharp

Avoid touching them!

prevent the food from becoming too finely

chopped.

◗ Do not let the appliance run too long when

you are chopping (hard) cheese.The cheese

will get too hot and will start to melt and

become lumpy.