Pitney Bowes manual Important Safety Notes Assembling the DA700/DA750

Getting Started with the DA700/DA750 Printer • 2

Important Safety Notes (continued)

Assembling the DA700/DA750

•DO NOT remove covers. The machine covers serve to enclose hazardous parts. If the machine has been dropped or has otherwise had the covers stressed in any way, report it to your Pitney Bowes Customer Service Representative.

•To reduce the risk of fire and/or electrical shock, do not attempt to disassemble this machine. If service is re- quired, contact your Pitney Bowes Customer Service Representative.

•Keep fingers, loose clothing, jewelry and long hair away from the moving parts.

•Use only Pitney Bowes approved ink cartridges and cleaners. Read all instructions before attempting to oper- ate the equipment.

•Follow any specific occupational safety and health stan- dards for your workplace or area.

Once you’ve placed the printer in a suitable location, assem- ble the printer components in the following order:

NOTE: Do not plug the printer into the power source until you’ve completed steps 1-4.

1.Attach the wire frame input stacker (page 2-6).

2.Install the sliding fence (page 2-7).

3.Position the output stacker (page 2-8).

4.Connect the parallel or serial cable (page 2-9).

5.Attach the power cord and turn the printer ON (page 2-11).

SV61027 Rev. D 2-5