Pitney Bowes manual Connecting the DA700/DA750 to Your Computer

Getting Started with the DA700/DA750 Printer • 2

Connecting the DA700/DA750 to Your Computer

Connecting the Parallel Cable or Serial Cable

Use the parallel cable supplied to connect the DA700/DA750 to your computer, or use an approved serial cable. Each end of the parallel cable has a connector. One end is labeled “Printer” and the other is labeled “Computer.”

1.To connect the Parallel Cable (supplied) to the printer, align the end of the cable connector labeled “Printer” with the parallel port located on the right side of the printer’s interface panel, and push the cable connector into the port. The interface panel is located at the rear of the printer. It contains the main power switch, the parallel cable port, the serial port, the power receptacle and fuse.

Parallel Port

Serial Port

2.Secure the connector by snapping the two wire clips over the corresponding tabs on the connector.

SV61027 Rev. D 2-9