Pitney Bowes manual Assembling the DA700/ DA750, Attach the Wire Frame to the Printer

2 • Getting Started with the DA700/DA750 Printer

Assembling the DA700/ DA750 (continued)

Attach the Wire Frame to the Printer.

1.Hook the bottom edge of the wire frame under the de- flector. The wire frame slides between the feed rollers and the paper deflector. Make sure the front rod is en- gaged into the key slot bottom.

Slide bottom edge under here.

Insert the metal sheet into the height adjustment slot.

2.Rotate the wire frame and insert the curved metal sheet on the bottom of the frame into the height adjustment slot.

3.Adjust the angle of the wire frame so it’s positioned at about a 45 degree angle. Turn the lock knob on the side of the slide clockwise to hold the wire frame in position.

You can adjust both the height and side-to-side position of the wire frame to accommodate the size and type of the material you’re running. We talk about this in the next chapter.

2-6 SV61027 Rev. D