Pitney Bowes DA750, DA700 manual Install the Sliding Fence

Getting Started with the DA700/DA750 Printer • 2

Assembling the DA700/DA750 (continued)

Install the Sliding Fence

The DA700/DA750 has two fences—a long one and a short one. Use the short fence when printing material smaller than a #10 envelope. Use the long fence for larger material.

1.Slide the square edge of the sliding fence into the slots on the frame slide as shown below.

Insert Sliding Fence between Slide Guides and Feed Carriage.

2.The next chapter explains how to set the fence to the width of the material you’re running.

SV61027 Rev. D 2-7