Appendix A • Control Panel Menus
2.Test Print Head (continued)
3.Purge Print Head
3.Press + for Yes to print the test pattern, or press – for No to cancel. If you press +, “Please wait...Test patern is printing” displays. The printer prints a diagonal line across the material. If a gap is present within the di- agonal line, the nozzle may be blocked and need to be cleaned.
4.Press the Menu button to back out of the menu until the printer displays OFF LINE. Then press the ON LINE button to enable the printer.
The purging process clears any clogged ink on the print noz- zle. Often this will return the print quality to a normal level. To select this option:
1.Press the + or – buttons to scroll through the Setup Menu options until the Purge Test Head option appears on the LCD panel.
2.Press the Enter button to select this option.
3.To select Purge Print Head cycle, press Enter when the “Purge Print Head?” message displays.
This option can be enabled by pressing the
+ button (YES) or disabled by pressing the
–button (NO). If enabled, the printer will display “Please wait...Ink Jets being purged”.
4.Press the Menu button to back out of the menu until the printer displays OFF LINE. Then press the ON LINE but- ton to enable the printer.
SV61027 Rev. D |
