Pitney Bowes DA750, DA700 manual Adjust the Media Thickness Knob

DA700/DA750 Features and Adjustments • 3

Setting Up A Job (continued)

7. Adjust the Media Thickness Knob

The media thickness knob sets the distance between the printhead and the material. Use it to compensate for differ- ent material thicknesses and to increase clarity of the print- ing.

1.Estimate the thickness of the material to be run

NOTE: All material in a run must be the same thickness. For envelopes with 0 - 2 inserts, start with the media thick- ness knob set as shown below. For 1/4" thick material, start with setting all the way at the Thick side. For 1/8", start 1/2 way.

2.While running test samples, turn the knob counter-clockwise to close the gap until the desired quality of printing is obtained.

NOTE: Adjusting the media thickness knob too far counter clockwise may cause smearing or jamming.

SV61027 Rev. D 3-17