Control Panel Menus • Appendix A

1.Heavy Media Mode

2.Test Print Head

The only time you need to turn this mode on is when you are using long, heavy envelopes. This option increases motor torque and slows down the feed rate. This option is normally OFF.

To use this option:

1.Press the + or – buttons to scroll through the Setup Menu options until the Heavy Media Mode option ap- pears on the LCD panel.

2.Press the Enter button to select this option.

3.Press the + or – buttons to select A. ON or B. OFF.

4.Press the Enter button to select the desired option.

5.After you have made your selection, press the Menu button several times to back out of the Menu, until the printer displays OFFLINE. Then, press the ON LINE but- ton to enable the printer.

Before you select this option, make sure that the material is loaded in the printer input area so you can print a test pat- tern.

To use this option:

1.Press the + or – buttons to scroll through the Setup Menu options until the Test Print Head option appears on the LCD panel.

2.Press the Enter button to select this option. The LCD will display “Print test pattern?”

SV61027 Rev. D

A-23

Page 107
Image 107
Pitney Bowes DA750, DA700 manual Heavy Media Mode Test Print Head