Appendix A • Control Panel Menus

1.Address Layout (continued)

B. Distance to Bottom (Bottom Margin)

Use this option to set the distance from the top address line to the bottom of the envelope. For #10 envelopes this should be about two inches.

Press the + or – buttons to increase or decrease the Dis- tance to Bottom, (+ MORE or – LESS) defined in inches or millimeters. The bottom margin is the distance between the bottom edge of the material and base of first line of the ad- dress.

Minimum distance between the last line of the address and the bottom edge of the material is 5/8”. If less than 5/8”, the lower right barcode will not be printed.

Press the Enter button to enable the desired measurement.

A-8

SV61027 Rev. D

Page 92
Image 92
Pitney Bowes DA700, DA750 manual Distance to Bottom Bottom Margin