3 • DA700/DA750 Features and Adjustments
Setting Up A Job (continued)
7. Control Panel
Use the control panel buttons to access printer menus, de- fine print options, run the print job, position the print carriage and turn the printer on and off line. See Appendix A, Printer Menus, for detailed instructions.
If you have the DA700/DA750 print driver loaded on your computer, you can easily perform these functions from within your software application.
8. Stacker Tray
Printed material is deposited in the stacker (catch) tray. The tray holds about 5" of material.
9. Exit Rollers (Not Shown)
Guide the printed material as it exits the printer. Adjust so that each roller overlaps the edge of the material by at least 1/4".
10. Print Area Door Assembly
Open to gain access to the print cartridge and exit rollers.
SV61027 Rev. D |
