Pitney Bowes DA750, DA700 manual Adjust the Exit Rollers

DA700/DA750 Features and Adjustments • 3

Setting

Up A Job (continued)

8. Adjust the Exit Rollers

Adjust the exit rollers so they overlap the left and right edges of the material by 1/4". Rotate the release lever to vertical then slide the rollers from side to side to make the adjust- ment and press the lever down to lock. Must be down and latched to operate.

Exit Roller Release Lever

Exit Slide Rollers (in jam-clearing position)

IMPORTANT: Make sure the rollers do not touch any printed area of the material. If this happens, the rollers will act like a printing press and imprint a faint impression at incremental distances on the material. If this happens, move the roller or rollers toward the nearest clear zone, that is, an area free of printing.

SV61027 Rev. D 3-19