Pitney Bowes DA700, DA750 manual Set the Wire Frame Ramp

3 • DA700/DA750 Features and Adjustments

Setting Up A Job (continued)

4.Set the Wire Frame Ramp

Slide Ramp Upward—Slide the ramp to the top of the Wire Frame.

Slide Ramp Down—With the Feed Gap properly set for one piece of media, slide the ramp down.

Adjust Ramp to Edge of Media —Add a stack of media and adjust the ramp downward until the first piece of media is resting half way down the angle of the ramp surface as pictured be- low (one piece of media is shown for simplicity).

NOTE: This picture is shown without the Slid- ing Fence, for ease of illustration.

3-14 SV61027 Rev. D