Pitney Bowes DA700, DA750 manual Material Size and Thickness, Material Notes

Appendix B • DA700/DA750 Specifications

Material Specifications (continued)

Material Size and Thickness

	Width	Height	Thickness
Minimum	3” (76mm)	5” (127mm)	.003” (.0762mm)
Maximum	15.5” (394mm)	15” (381mm)	.250” (6.35mm)

Also see the table on page B-10

Material Notes

Envelopes have a flap along the long edge and are pro- cessed by the printer non-flap edge first. Envelopes may have either a diagonal or straight edge along the envelope flap. Stuffing materials must be machine folded or cut sheets.

Booklets are defined as media having physical dimensions 6 x 9” or larger. Booklets have an opening along their long edge which is covered by a flap with an adhesive seal.

Catalog envelopes have an opening along their short edge which is closed by a flap with an adhesive seal.

Postcards have no folds or bends. The printable side may have a higher surface roughness than the non-printable side.

Self-mailersmay be of “C,” “Z,” or 1/2-folded construction. They may not exceed the maximum allowable thickness as specified on the previous page and must be tabbed per post- al regulations. 1/2 and tri-folds must be machine produced.

B-10 SV61027 Rev. D