Proxim AP-4000 manual Sntp Parameters Name Type Value Access CLI Parameter, 190

Command Line Interface (CLI)								AP-4000 Series User Guide
Parameter Tables
SNTP Parameters
	Name		Type			Value		Access		CLI Parameter
	SNTP Group	Group		N/A			R		sntp
	SNTP Status	Integer		enable			RW		sntpstatus
				disable
	Primary Server Name or	DisplayString		0		- 255 characters	RW		sntpprisvr
	IP Address
	Secondary Server Name	DisplayString		0		- 255 characters	RW		sntpsecsvr
	or IP Address
	Time Zone	Integer		See MIB for			RW		sntptimezone
				requirements
	Daylight Savings Time	Integer		-2			RW		sntpdaylightsaving
				-1
				0
				+1
				+2
	Year	Integer32		N/A			RW		sntpyear
	Month	Integer32		1		- 12	RW		sntpmonth
	Day	Integer32		1		- 31	RW		sntpday
	Hour	Integer32		0		- 23	RW		sntphour
	Minutes	Integer32		0		- 59	RW		sntpmins
	Seconds	Integer32		0		- 59	RW		sntpsecs
	Addressing Format	Integer		ipaddress			RW		sntpaddrfmt
				name
Link Integrity Parameters
	Name		Type			Value		Access		CLI Parameter
	Link Integrity*		Group		N/A			R		linkint
	Link Integrity Status*		Integer		enable			RW		linkintstatus
					disable (default)
	Link Integrity Poll Interval*		Integer		500 - 15000 ms			RW		linkintpollint
					(in increments of 500ms)
					500 ms (default)
	Link Integrity Poll		Integer		0 - 255			RW		linkintpollretx
	Retransmissions*				5 (default)

* Link integrity cannot be configured when the AP is configured to function as a Mesh AP.

Link Integrity IP Target Table

Name	Type	Value	Access	CLI Parameter
Link Integrity IP Target Table	Table	N/A	R	linkinttbl
Table Index	Integer	1 - 5	N/A	index
Target IP Address	IpAddress	User Defined	RW	ipaddr
Comment (optional)	DisplayString	User Defined (up to 254	RW	cmt
		characters)
Status (optional)	Integer	enable	RW	status
		disable (default)
		delete

190