Command Line Interface (CLI) |
|
Other Network Settings
Set RADIUS Parameters
Configure RADIUS Authentication servers
Perform the following command to configure a RADIUS Server and assign it to a VLAN. The RADIUS Server Profile index is specified by the index parameter and the subindex parameter specifies whether you are configuring a primary or secondary RADIUS server.
-Name> sernameorip <IP Address or Name> port <value> ssecret <value> responsetm <value> maxretx <value> acctupdtintrvl <value> macaddrfmt <value> authlifetm <value> radaccinactivetmr <value> vlanid <vlan id
NOTE: To create a new RADIUS profile, use 0 for <Index>.
Examples of Configuring Primary and Secondary RADIUS Servers and Displaying the RADIUS Configuration
Primary server configuration:
20.0.0.20port 1812 ssecret public responsetm 3 maxretx 3 acctupdtintrvl 0 macaddrfmt 1 authlifetm 900 radaccinactivetmr 5 vlanid 22 status enable
Secondary server configuration:
20.0.0.30port 1812 ssecret public responsetm 3 maxretx 3 acctupdtintrvl 0 macaddrfmt 1 authlifetm 900 radaccinactivetmr 5 vlanid 33 status enable
| |
Index | : 1 |
Primary/Backup | : Primary |
Profile Name | : MAC Authentication |
Server Status | : notReady |
Server Addressing Format | : ipaddr |
IP Address/Host Name | : 0.0.0.0 |
Destination Port | : 1812 |
VLAN Identifier | : |
MAC Address Format | : dashdelimited |
Response Time | : 3 |
Maximum Retransmission | : 3 |
Authorization Lifetime | : 0 |
Accounting Update Interval | : 0 |
Accounting Inactivity Timer | : 5 |
Index | : 1 |
Primary/Backup | : Backup |
Profile Name | : MAC Authentication |
Server Status | : notReady |
Server Addressing Format | : ipaddr |
IP Address/Host Name | : 0.0.0.0 |
Destination Port | : 1812 |
VLAN Identifier | : |
MAC Address Format | : dashdelimited |
Response Time | : 3 |