Command Line Interface (CLI) |
|
|
| |||
Parameter Tables |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Name | Type | Value | Access | CLI Parameter |
|
| Port Number | Octet String | User Defined | RW | portnum |
|
|
|
| (there are also 4 |
|
|
|
|
|
|
|
|
| |
|
|
| Index 1: NetBios Name |
|
|
|
|
|
| Service - 137, Index 2: |
|
|
|
|
|
| NetBios Datagram |
|
|
|
|
|
| Service - 138, Index 3: |
|
|
|
|
|
| NetBios Session Service |
|
|
|
|
|
| - 139, Index 4: SNMP |
|
|
|
|
|
| Service - 161) |
|
|
|
| Protocol Name | DisplayString | User Defined | RW | protoname |
|
|
|
| (there are also 4 |
|
|
|
|
|
|
|
|
| |
|
|
| see Port Number above) |
|
|
|
| Interface Bitmask | Integer32 | 0 or 2 = No interfaces | RW | ifbitmask |
|
|
|
| (disable) |
|
|
|
|
|
| 1 or 3 = Ethernet |
|
|
|
|
|
| 4 or 6 = Wireless A |
|
|
|
|
|
| 8 or 10 = Wireless B |
|
|
|
|
|
| 12 = Wireless A & B |
|
|
|
|
|
| 13 or 15 = All interfaces |
|
|
|
|
|
| (default is 15) |
|
|
|
| Status (optional) | Integer | enable (default for new | RW | status |
|
|
|
| entries) |
|
|
|
|
|
| disable (default for |
|
|
|
|
|
|
|
|
| |
|
|
| delete |
|
|
|
Alarms Parameters
SNMP Table Host Table Parameters
When creating table entries, you may either specifying the argument name followed by argument value. CLI applies default values to the omitted arguments. Due to the nature of the information, the only argument that can be omitted is the “comment” argument.
Name | Type | Value | Access | CLI Parameter |
SNMP Trap Host Table | Table | N/A | R | snmptraphosttbl |
Table Index | Integer | User Defined | N/A | index |
IP Address | IpAddress | User Defined | RW | ipaddr |
Password | DisplayString | User Defined (up to 64 | W | passwd |
|
| characters) |
|
|
Comment (optional) | DisplayString | User Defined (up to 254 | RW | cmt |
|
| characters) |
|
|
Status (optional) | Integer | enable (default) | RW | status |
|
| disable |
|
|
|
| delete |
|
|
