Advanced Configuration |
|
SSID/VLAN/Security |
|
|
|
7.Enable or disable RADIUS accounting on the VLAN/SSID under the Accounting Status
8.Enable or disable RADIUS MAC authentication status on the VLAN/SSID under the RADIUS Authentication Status
9.Enable or disable MAC Access Control List status on the VLAN/SSID under the MAC ACL Status
11.Enter the Security Profile used by the VLAN in the Security Profile field.
NOTE: If you have two or more SSIDs per interface using a Security Profile with a security mode of Non Secure, be aware that security being applied in the VLAN is not being applied in the wireless network.
12.Define the RADIUS Server Profile Configuration for the VLAN/SSID:
•RADIUS MAC Authentication Profile
•RADIUS EAP Authentication Profile
•RADIUS Accounting Profile
If 802.1x, WPA, or 802.11i security mode is used, the RADIUS EAP Authentication Profile must have a value.
A RADIUS Server Profile for authentication for each VLAN shall be configured as part of the configuration options for that VLAN. RADIUS profiles are independent of VLANs. The user can define any profile to be the default and associate all VLANs to that profile. Four profiles are created by default, “MAC Authentication”, “EAP Authentication”, Accounting”, and “Management”.
13.Specify a QoS Profile. See the Enabling QoS and Adding QoS policies section for more information.
14.If editing an entry, enable or disable the parameters on this page using Status
15.Reboot the AP.
Broadcast SSID and Closed System
Broadcast SSID allows the broadcast of a single SSID when the AP is configured for multiple SSIDs. Broadcast SSID may only be enabled for a single SSID. This object can only be configured using the CLI and SNMP using a MIB browser or network management application.
Closed System manages the way probe requests are handled. If enabled, the AP will respond to probe requests with an SSID only if the client has specified the SSID in the probe request. If the client sends a probe request with a null or “ANY” SSID, the AP will respond with a null SSID. If disabled, the AP will respond with each configured SSID, whether or not an SSID has been specified in the probe request. This option is disabled by default.
For more information, on Broadcast SSID and Closed System, see Knoweldgebase Answer ID 1698 at http://support.proxim.com.
