Advanced Configuration

AP-4000 Series User Guide

Alarms

 

 

 

 

 

 

 

 

RFC 1215-Trap

 

 

 

 

 

 

 

 

Trap Name

Description

Severity Level

 

 

 

 

 

coldStart

AP is on or rebooted

Informational

 

 

 

 

 

linkUp

AP's Ethernet interface link is up (working)

Informational

 

 

 

 

 

linkDown

AP's Ethernet interface link is down (not working)

Informational

 

 

 

 

 

Bridge MIB (RFC 1493) Alarms

 

 

 

 

 

 

 

 

Trap Name

Description

Severity Level

 

 

 

 

 

New Root

AP has become the new root in the Spanning

Informational

 

 

Tree network

 

 

 

 

 

 

 

topologyChange

Trap is not sent if a newRoot trap is sent for the

Informational

 

 

same transition

 

 

 

 

 

 

 

All these alarm groups correspond to System Alarms that are displayed in the System Status Screen, including the traps that are sent by the AP to the SNMP managers specified in the Alarm Host Table.

Alarm Host Table

To add an entry and enable the AP to send SNMP trap messages to a Trap Host, click Add, and then specify the IP Address and Password for the Trap Host.

NOTE: Up to 10 entries are possible in the Alarm Host table.

IP Address: Enter the Trap Host IP Address.

Password: Enter the password in the Password field and the Confirm field.

Comment: Enter an optional comment, such as the alarm (trap) host station name.

To edit or delete an entry, click Edit. Edit the information, or select Enable, Disable, or Delete from the Status drop-down menu.

89

Page 89
Image 89
Proxim AP-4000 manual RFC 1215-Trap Trap Name Description Severity Level, Alarm Host Table