Send Settings

D Select [Send at Specified Time] using {U}or {T}, and then press the {OK}key.

2

To cancel the setting, select [Off], and then press the {OK}key. The display re-

turns to that of step C.

E Enter the time using the number keys and press [AM/PM] to switch between AM and PM. Then press the {OK} key.

When entering numbers smaller than 10, add a zero at the beginning.

If you make a mistake, press the {Clear/Stop} key before pressing the {OK} key, and then try again.

To cancel Send Later, press the {Escape} key. The display returns to that of step C.

F Press the {Escape} key.

The standby display appears.

To check the settings, press [TX Mode].

G Specify a destination, and then press the {Start} key.

Note

You can specify a time within 24 hours of the current time.

If the current time shown is not correct, change it.

Reference

p.87 “Canceling a Transmission”

“System Settings”, General Settings Guide

“Troubleshooting When Using the Facsimile Function”, Troubleshooting

92