Ricoh 2000 A Press [Exit], Press the {Start} key, Remove the original and replace it

Transmission

If the Machine Cannot Detect the Size of Your Original

If the machine cannot detect the original size, the “Cannot detect original

1 size. Place original again, then press Start key.” message appears.

If this happens, do the following:

A Press [Exit].

The previous display returns.

B C

Remove the original and replace it.

Press the {Start} key.

Note

❒If you repeat steps A to C twice and the original size is still not detected, the screen for specifying the original size appears. Select the original size, and then press the {OK} key.

38