Printing Options

 

 

Note

 

 

Your service representative can customize this function with the following

 

 

settings:

 

 

Reduction

 

 

Print split mark

 

 

Overprinting

 

 

Overprinting length

 

 

Guideline for split

 

 

You can adjust the overprinting and reduction lengths within the following

 

 

 

3

ranges:

 

Overprinting length: 4 mm (0.16"), 10 mm (0.39"), 15 mm (0.59")

Guideline for split: 5-155 mm (5 mm steps)/0.2-6.1" (0.2" steps)

Page Reduction

If you receive a document that is longer than the paper in the tray, the machine usually prints it on two pages. If you turn this function on, the machine reduces the width and length of the received image so that it will fit on one page.

If A4Lpaper is loaded and a document of B4 JISLsize is received, the machine will reduce the document to a single A4L sheet.

Note

You can turn this function on or off with the User Parameters (switch 10, bit 3) in the Fax Features menu.

When this function is used, the printing quality may not be as good as usual.

Reference

p.134 “Page Separation and Length Reduction”

“Fax Features”, General Settings Guide

135