Send Settings

I When a password is required, enter the SID Code using the number keys, and then press the {OK} key.

 

 

2

When a SID Code is not required, just press the {OK} key.

 

The standby screen returns.

J Press the {Start} key.

If you use Immediate Transmission and the fax machine at the destination does not support the SUB Code function, a message will appear on the display to inform you of this. When this happens, press [Exit] to cancel the transmission.

Note

Make sure the number of digits in the SUB Code matches the specification of the machine to which you are sending. For the maximum number of dig- its for the SUB Code of this machine, see “Maximum Values”.

You can store SUB Codes as well as names and fax numbers in the destination list.

The SUB Code is printed on lists and reports.

Reference

p.186 “Maximum Values”

“Fax Features”, General Settings Guide

“Registering Addresses and Users for Facsimile/Scanner Functions”, General Settings Guide

Setting a Password

There are times when you may want to use an “SID” (Sender ID) when sending confidential faxes with the SUB Code function. When you use a Transfer Box that has a password, enter the SID Code as the password.

Note

You can store SID Codes as well as names and fax numbers in the destination list.

You can enter numbers, p, q, and spaces.

The SID Code is printed on lists and reports.

For the maximum number of digits for the SID Code, see “Maximum Values”.

Reference

p.186 “Maximum Values”

“Registering Addresses and Users for Facsimile/Scanner Functions”, General Settings Guide

108