Fax via Computer

Programming Destination Information from Web Browser

If the receiving machine is compliant with T.37 full mode Internet Fax, you can program the receiver's properties from Web Image Monitor. You can program the following properties:

Compression type

Paper size

Resolution

Note

It is recommended that you use a Web Image Monitor running under the same network environment as this machine. Otherwise, the Web browser may not open and an error may occur.

5

You can also check and manage the documents using DeskTopBinder.

For a detailed description, see Help for Web Image Monitor.

 

When a receiver that is programmed as full mode in the Address Book re- turns a Reception Notice e-mail, the contents of the newly received e-mail overwrite the existing information.

Reference

p.32 “T.37 Full Mode”

“System Settings”, General Settings Guide

“Monitoring and Configuring the Printer”, Network Guide

To Edit Machine Properties Already Programmed

Follow these steps to use Web Image Monitor to edit information about the destination machine registered in the Address Book.

A Start the Web browser.

B Enter the IPv4 address of the machine you want to monitor after “http://” in the address field.

The top screen is displayed.

C Click [Login], and then enter the Administrator's name and password. D Click [Address Book] in the left pane.

The Address Book is displayed.

E Click the radio button to the left of the machine you want to modify, and then click [Change].

The [Change User] page appears.

178