Ricoh 2000 Note, [TX Mode], Reference, Important, Press [TX Mode], Specify the sender, Specify a destination, I Press the {Start} key, Press the {Escape} key twice

E-mail Options

F

G H

Press the {Escape} key twice.

The standby screen returns.

To check the settings, press [TX Mode].

Specify a destination.

Specify the sender.

For details about specifying senders, see “Sender Settings”. 2

I Press the {Start} key.

Note

❒If you send e-mail without setting a subject, a subject is automatically in- serted. For details about how the subject is automatically inserted, see “E- mail Subject” and “Received Images”.

❒You cannot send a subject only as e-mail without an original.

❒For the maximum number of characters for an e-mail subject, see “Maxi- mum Values”.

Reference

p.31 “E-mail Subject”

p.93 “Sender Settings”

p.125 “Received Images”

p.186 “Maximum Values”

“Entering Text”, About This Machine

Requesting a Reception Notice

You can confirm sent documents were properly received using e-mail or the Journal.

When Reception Notice is set under “E-mail Options”, the receiver sends back a reception notice message. Once the reception notice message is received, “OK” appears in the Result column of the Journal, allowing the originator to verify the transmission was received.

Important

❒The Reception Notice feature is only available if the receiver supports MDN (Message Disposition Notification).

A B

Place the original, and then select the scan settings you require.

Press [TX Mode].

99