Reception

TSI Print (Transmitting Subscriber Identification Print)

Usually the sender's Fax Header is printed on received documents. When you receive an Internet Fax document, the e-mail address of the sender is printed. If the sender has not programmed their Fax Header, you will not be able to identify them. However, if you turn this function on, the sender's Own Name or Own Fax Number is printed instead so you can find out where the document came from.

Note

3

❒ You can turn this function on or off in the User Parameters (switch 02, bit 3)

in the Fax Features menu.

 

Reference

“Fax Features”, General Settings Guide

If There Is No Paper of the Correct Size

If there is no paper in the machine that matches the size of a received document, the machine will choose a paper size based on the paper available.

Page reduction

Disabled

 

 

Reduction in Sub-scan Direction

Enabled

 

 

Page Separation Threshold

20 mm (0.79")

 

 

Width or Length Priority

Width

 

 

Note

❒The document is split over two sheets of paper depending on the paper size.

❒Paper placed in the bypass tray is not usually selected for printing a received document.

❒Widths that this machine can receive are A4, B4 JIS, LT (81/2"⋅11") and A3. Any documents narrower than A4 or LT (81/2"⋅11") are received at A4 or LT (81/2"⋅11") width. The length of documents depends on the document.

❒The paper size used to print a received document may be different from the size of the sent original.

Reference

p.134 “Image Rotation”

p.134 “Page Separation and Length Reduction”

p.135 “Page Reduction”

136