Transmission

 

 

Note

 

 

Destinations programmed in groups can be checked using “Group Desti-

 

 

nation List” in “Administrator Tools” in “System Settings”.

 

 

If a destination where a fax number, e-mail address, or IP-Fax destination

1

 

 

is not programmed is included in the specified group, the confirmation

message appears. Press [Select] to specify destinations where the fax num- ber, the e-mail address, or IP-Fax destination is programmed. Press [Cancel ] to change the destination. You can select the priority order used to specify an alternative destination if there is no destination of the specified type. Make this setting with User Parameters (switch 32, bit 0) in the Fax Features menu.

To cancel any destination(s) among the group, display the desired destina- tion using {U} or {T}, and then press the {Clear/Stop} key.

Reference

p.61 “Checking the Specified Destination”

p.186 “Maximum Values”

“System Settings”, General Settings Guide

“Fax Features”, General Settings Guide

“Registering Addresses and Users for Facsimile/Scanner Functions”, General Settings Guide

60