Ricoh 2000 Note, Reference, 4Reference, p.186 “Maximum Values”, Print reports for confirmation, p.147 “Communication Failure Report”

Changing/Confirming Communication Information

Note

❒Only the transmission results of the latest communications are displayed. For the maximum number of communication results you can check on this machine, see “Maximum Values”.

❒You can view sent fax documents and their lists, using a network computer Web Image Monitor. For details, see the Web Image Monitor's Help.

❒If a transmission is completed while you are using this function, the result will not appear. To view the latest result, exit TX File Status, and then try again.

❒You can program one of the User Function keys with operations for this function. Using the key allows you to omit steps A and B.

❒When documents are transmitted from the computer to the machine, “--LAN-Fax -->” appears. To check if the documents are sent to the receiver, confirm the same File No.

4 Reference

p.186 “Maximum Values”

“Fax Features”, General Settings Guide

Confirming by Report

Print reports for confirmation.

❖Memory Transmission

If a document cannot be sent, a Communication Failure Report is automati- cally printed. Or, you can use the Communication Result Report to check each transmission result regardless of status.

This report is printed each time a Memory Transmission is completed if turned on with User Parameters (switch 03, bit 0) in the Fax Features menu. You can also print the report by programming the Print TX Status Report to a User Function key and pressing this when specifying a destination.

If you turn the Communication Result Report on, the Communication Failure Report is not printed.

❖Immediate Transmission

You can confirm the result with an Immediate TX Result Report.

Select to print this report in User Parameters (switch 03, bit 5) in the Fax Features menu. A report is printed after every Immediate Transmission is completed. You can also print the report by programming the Print TX Status Report to a User Function key and pressing this when specifying a destination.

Reference

p.146 “Communication Result Report (Memory Transmission)”p.146 “Immediate TX Result Report (Immediate Transmission)”p.147 “Communication Failure Report”

“Fax Features”, General Settings Guide

144