Ricoh 2000 Specifying a Destination, C Press the {Start} key, B Enter the fax number using the number keys, A Press [] to switch the destination to fax number

Specifying a Destination

Specifying a Destination

This section explains how to specify a destination.

Fax numbers, IP-Fax destinations, and e-mail addresses can be specified.
	1

Note

❒The display shows the percentage of free memory space for storing originals. Since fax numbers, IP-Fax destinations and e-mail addresses are programmed in separate memory, dialing fax numbers using the number keys does not change the percentage on the display.

Sending Over a Fax Line

Enter numbers directly using the number keys on the right side of the control panel.

A Press [] to switch the destination to fax number.B Enter the fax number using the number keys.

To specify a destination using a Quick Dial key, see “Using the Quick Dial Keys”. If you make a mistake, press the {Clear/Stop} key, and then enter again.

C Press the {Start} key.

The machine starts to scan the original and stores it in memory. When scanning ends, the Communicating indicator lights and transmission starts.

Note

❒You can insert pauses and tones in a fax number.

❒For the maximum number of digits for a destination, see “Maximum Values”.

Reference

p.48 “Entering a pause”

p.48 “Entering a tone”

p.58 “Using the Quick Dial Keys”

p.186 “Maximum Values”

47