Send Settings

Label Insertion

With this function you can have the receiver's name printed on the document that is received at the other end.

 

Important

2

To use this function, set Label Insertion to [On] when registering fax destina-

tions in the Address Book, and also select [Programmed Name] when sending

fax documents.

When there is an image around the area where the Label is to be printed, that image is deleted.

The receiver's name is printed as follows:

Receiver's name: printed at the top of the page and preceded by “To:”. Set this function as follows:

Set Label Insertion to [On] when programming fax destinations.

Select [Programmed Name] for Label Insertion when sending fax documents.

A Place the original, and then select the scan settings you require. B Press [TX Mode].

C Select [Label Insertion] using {U} or {T}, and then press the {OK} key.

D Select [Programmed Name] or [Off] using {U} or {T}, and then press the {OK} key.

The screen returns to that of step C.

E Press the {Escape} key.

The standby screen returns.

To check the settings, press [TX Mode].

104