Sender Settings

D

E

Enter the PIN Code, and then press the {OK} key.

The standby display appears.

 

2

If you make a mistake, press the {Clear/Stop} key before pressing the {OK}

 

key, and then try again.

 

Press the {Start} key.

 

Note

 

For the maximum number of digits you can use in a PIN Code, see “Max- imum Values”.

You can enter numbers, p, q, and pauses.

PIN Codes are not printed in lists and reports.

You can set the machine so that a PIN Code must be entered after the fax num- ber before you can send a fax. For details, contact your service representative.

Reference

p.186 “Maximum Values”

“Fax Features”, General Settings Guide

97