Programming Destination Information from Web Browser

F Set the properties for Internet Fax data format other than the mode selection.

If you change the mode to “Simple Mode”, you cannot set machine properties.

G Click [OK] at the upper-left of the screen.

To cancel the setting, click [Cancel] in the upper-left of the screen.

The Address Book is displayed.

H Close the Web browser.

To Add New Receiver

Follow these steps to use Web Image Monitor to add a new destination to the Address Book.

A Start the Web browser.

B Enter the IPv4 address of the machine you want to monitor after “http://” in 5 the address field.

The top screen is displayed.

C Click [Login], and then enter the Administrator's name and password. D Click [Address Book] in the left pane.

The Address Book is displayed.

E Click [Add User].

The [Add User] page appears.

F Enter the registration number, name, and e-mail address, then set the necessary properties.

You can set the Internet Fax data format after entering the e-mail address.

G Click [Full Mode] under [Internet Fax Data Format], and set the properties according to the receiver's properties.

If you change the mode to “Simple Mode”, you cannot set machine properties.

H Click [OK] in the upper-left of the screen.

To cancel the setting, click [Cancel] in the upper-left of the screen.

The Address Book is displayed.

I Close the Web browser.

179