Sharp FO-IS115N operation manual Being polled Memory polling

Polling (Requesting a Fax)

Being polled (Memory polling)

To let another fax machine poll your machine, you must first scan the document into memory using the following procedure. Transmission will take place when the other fax machine calls your machine and activates polling. You can choose whether to allow polling only once, or an unlimited number of times.

♦ If you allow polling only once, the document will be automatically cleared from memory after polling. If you allow polling an unlimited number of times, the document will remain in memory until you clear it as explained on page 97.

1 Load the document.

• If desired, press	RESOLUTION
	to set the resolution and/or contrast.

2

3

4

5

6

7

Press	FUNCTION	until [MEMORY POLLED] appears.
	, then

Press .

Press to select SET.

Display: [1=ONCE, 2=REPEAT]

Press to allow polling only once, or to allow polling an unlimited number of times.

Press START .

•The document is scanned into memory.

Set the reception mode to AUTO (press RECEPTION until “AUTO” appears in the display).

96