Sharp FO-IS115N operation manual Network Scanning, For the Port Number, “25” is normally entered

Setting up Network Scanning

For the Port Number, “25” is normally entered.

Under Authentication Option, select No authentication if your SMTP server does not require authentication.

If your SMTP server requires SMTP authentication, select SMTP Authentication and enter your User Name and Password.

If your mail service requires POP before SMTP authentication, select POP before SMTP and enter the host name or IP address of your POP server in POP Server. Enter the Port Number, your User Name, and Password.

Under E-mail Settings, enter the Sender Name that you wish to have appear on e-mail sent from the machine, and the sender E-mail Address.

Note: The E-mail Address must be entered. This must be a valid e-mail address. Responses to e-mail sent from the machine and any undelivered mail reports will be sent to this address. It is normally convenient to use the e- mail address of the administrator of the machine or other person in charge of machine communication.

Enter an E-mail Subject and E-mail Message, and select the File Format used for the scanned image.

♦The Sender Name, E-mail Subject, E-mail Message, and File Format that you enter in this screen are default settings. These settings will be used if the sender does not specify this information at the time of transmission.

♦For further information on the settings in this screen, click Help in the menu frame.

2. Network Scanning

33