Sharp FO-IS115N operation manual Checking and cancelling stored fax jobs, Sending, Faxes

Sending a Fax by Automatic Dialling

Checking and cancelling stored fax jobs

If you use automatic dialling (including Direct Keypad Dialling) to send a fax while the machine is busy with another job, the fax job will be stored in the machine’s memory and performed after all previously stored jobs are finished.

To check what fax jobs are waiting in memory to be performed, or to cancel a job, follow the steps below.

♦Timer transmission jobs can also be checked and canceled using this procedure.

1 Press INFO .

2 Make sure that [TX JOBS] appears in the display and press .

3 Press or to scroll through the stored fax jobs.

•The top line of the display shows the memory number assigned to the job and the time the job was stored. The bottom line alternately shows the destination and the status of the job.

•[NO DATA] will appear if no jobs are currently stored in memory.

4 To cancel a job, display the job and press START .

[IF CLEAR, PRESS START] will appear. Press START again to clear the job.

5 Press STOP to exit.

Sending	Faxes
3.

67