Sharp FO-IS115N operation manual Timer Transmission

Up to 15 timer jobs can be stored at once.

Timer Transmission

Timer Transmission

The Timer function allows you to store a fax transmission job to be performed automatically at a time you specify. The time can be specified up to 24 hours in advance.

♦ You can use this function to take advantage of lower off-peak rates without having to be there when the transmission is performed.

♦

♦ Multiple destinations can be entered if all are stored in Rapid Keys or Speed Dial numbers. A Group Key can also be used (once a Group Key is used, no further destinations can be entered).

♦ A destination can be specified by entering a full fax number with the number keys, however, in this case only one destination can be entered.

1 Load the document(s).

• If desired, press	RESOLUTION
	to set the resolution and/or contrast.

2

3

4

Press TIMER .

Press to select “SET”.

Enter the time at which the fax is to be transmitted.

•Enter a two-digit number for the hour ("00" to "23") and a two-digit number for the minute ("00" to "59").

Example: 9:25

5

6

Press START .

Enter the fax number using one of the methods below:

100