Sharp FO-IS115N operation manual Using an auto-dial number to send a fax

Sending a Fax by Automatic Dialling

Using an auto-dial number to send a fax

1

2

Load the document(s).

• If desired, press	RESOLUTION
	to set the

resolution and/or contrast.

Select the fax number using one of the methods below:

•Rapid Key Dialling: If the number is stored in a Rapid Key, press the Rapid Key.

•Speed Dialling: If the number is stored in a Speed Dial number, press

SPEED DIAL

and enter the Speed Dial number with the number keys (the

number must be 3 digits: enter “001” for Speed Dial 1, “010” for Speed Dial 10, etc.). Make sure the correct destination appears in the display (if not,

press STOP ), and then press START .

•Search Dialling: Press or until the name or number of the other party appears in the display, and press START .

3 Scanning, dialling, and transmission will take place automatically.

• To cancel transmission, press STOP .

•If the transmission is completed successfully, the machine will beep once.

•If an error occurs, the machine will beep three times and print a Transaction Report to inform you of the problem (see page 110).

64