Sharp FO-IS115N operation manual Initializing the network settings

Network Settings

•If you make a mistake, press to move the cursor to the mistake and enter the correct number.

6

7

When finished entering the number, press START .

The next setting will appear in the display. Repeat Steps 4 through 6 to

STOP

configure the next setting, or press to exit.

Initializing the network settings

If you need to return the network settings to their initial state, follow the steps below.

♦Initializing the settings enables DHCP and clears the IP address and related settings.

1

2

3

Press	FUNCTION	until [NETWORK SETTING] appears.
	, then

Press , then until [INITIALIZE SETTINGS] appears.

Press START .

Display: [INITIALIZE SETTINGS] / [IF OK, PRESS START]

4 Press START .

46