Sharp FO-IS115N operation manual Number Of

Option Settings

NUMBER OF	This sets the number of rings on which the machine answers calls
RINGS	when the reception mode is set to AUTO. Enter any number from
	1 to 5.
	Initial setting: 1 ring.
TRANSACTION	This sets the condition for printing transaction reports (see page
LIST	110). Press a number key as follows:
		(ALWAYS PRINT): Print after every fax transmission,
		reception and error.
		(ERROR/MEMORY): Print only after an error or memory
		operation.
		(SEND ONLY): Print after every fax transmission.
		(ERROR ONLY): Print only when an error occurs.
		(NEVER PRINT): Never print.
	Initial setting: ERROR ONLY
FLASH	This setting is used when the machine is connected to a PBX and
SELECT	the PBX uses the “Flash” method to connect to an outside line.
	Press	(SHORT TIME) if your PBX line is a normal line, or

(LONG TIME) if your PBX is a high-speed line.

	Note: This setting is normally only used in Germany. In other
	countries, you can try changing the setting if you encounter
	difficulty with the default setting.
	Initial setting: SHORT TIME
FAX SIGNAL	If you hear a soft fax tone after the machine rings and you answer
RX	on the machine’s handset, the machine will automatically begin
	reception. If desired, you can turn automatic reception off. Press
	(YES) to turn on the the automatic reception function, or
	(NO) to turn off the function. If you select NO, you must start
	reception manually by pressing START on the machine each time

you hear a soft fax tone after answering a call. Initial setting: YES

104