Sharp FO-IS115N operation manual Scan to Folder Transmission, Network Scanning

Scan to Folder

Scan to Folder Transmission

Follow the steps below to send a scanned document to a network folder.

♦The document will be sent as an image file. The file format can be selected in Steps 4 and 5 below.

1Insert the document face down in the document feeder. The top edge of the

document should enter the feeder first.

• SEND READY will appear in the display.

•Up to 30 A4-size sheets can be placed in the feeder at once.

•For more information on loading the document, see page 52.

• If desired, press	RESOLUTION
	to set the resolution and contrast (see p. 54).

2 Select the destination using one of the following methods:

•If the destination has been stored in a Rapid Key, press the Rapid Key.

SPEED DIAL

• If the destination has been stored in a Speed Dial number, press and enter the Speed Dial number.

• To search for the destination, press SCAN TO FOLDER , press	or
until the name or address appears, and press START .

3 If you need to specify either of the file options, press and go to

Step 4 below. (Note that settings selected here are temporary. To make permanent changes, change the settings in the Web page as explained on pages 47 and 48.)

If you do not wish to change the file options, go directly to Step 6.

2. Network Scanning

49