Sharp FO-IS115N operation manual Messages and Signals

Messages and Signals

RCVD FAX TRANSFER	This appears when the Fax to E-mail/Folder function is
	activated (page 92).
RECALLING	This appears if you attempt to send a fax by auto dialling
	and the line is busy or the receiving fax machine does
	not answer. Your machine will automatically reattempt
	the call. (See Automatic redialling on page 66.)
SERVER ERROR	A Scan to E-mail transmission was not successful
	because the machine could not connect to your mail
	server or there was no response from the mail server.
	Make sure the SMTP server setting is correct (p. 31). If
	you have configured “POP before SMTP” settings in the
	Web page, make sure these settings are correct. If
	[CABLE DISCONNECTED] appears on the bottom line,
	see “CONNECTION ERROR” on page 126.
SERVER ERROR/	A Scan to E-mail transmission was not successful
SMTP-AUTH	because your SMTP server requires SMTP
	authentication and the SMTP authentication user name
	or password entered in the machine’s Web page is not
	correct (p. 33).
SERVER NOT FOUND/	See “CONNECTION ERROR” on page 126.
CABLE DISCONNECTED
SERVER NOT FOUND/	A Scan to E-mail transmission was not successful
DHCP	because the machine was unable to automatically
	obtain an IP address. Restart your router or other device
	that acts as your DHCP server.
SERVER NOT FOUND/	A Scan to E-mail transmission was not successful
SMTP	because an incorrect host name is entered for your
	SMTP server. Check the SMTP server setting (p. 31).
THERMISTOR ERROR	If this message appears, unplug the power cord and
	then plug it back in. If the message still appears, call for
	service.

128