Sharp FO-IS115N operation manual Option Settings

8. Option Settings

Option Settings

Option Settings

The option settings allow you to customize the operation of the machine to better suit your needs.

The option settings have been initially configured at the factory. To change a setting, follow the steps below to display the setting, and then enter a new selection for the setting as explained in the table that follows.

1 Press	FUNCTION	until [OPTION SETTING] appears.
	, then

2 Press , then repeatedly until the desired setting appears.

•The option settings are described in the table below and on the following pages.

3 Enter a selection for the setting by pressing the number keys as explained in the table.

4 After entering a selection, the subsequent option setting will appear in

the display. To exit the settings, press STOP .

8.

Option Settings

Make a selection for the displayed setting as explained below.

This is done in step 3 of the above procedure.

Setting	Description
FINE PRIORITY	This is used to change the default resolution for faxing from
	STANDARD to FINE. Press	(YES) to select FINE, or
	(NO) to select STANDARD.
	Initial setting: NO (STANDARD)

103